Farm Progress is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Corn+Soybean Digest

Take Steps to Reduce Compaction Before Spring Planting

With a late harvest, a wet fall and slow-melting snow, Ohio farmers may be facing more compaction issues than usual this spring. But no-till farmers may be better off than others, says Randall Reeder, Ohio State University (OSU) Extension agricultural engineer.

“Farmers faced a late harvest and a wet fall, and with so much snow they haven’t had the opportunity to get into their fields and prepare the ground for planting,” Reeder says.

Reeder also says that heavy combines and grain carts driven on wet or saturated soils increased the risk for soil compaction. Compaction destroys the soil structure and leaves ruts, which can increase spring planting problems like poor plant establishment, which can put a ceiling on yield potential.

No-till fields are probably less rutted than soil that was tilled prior to last season.
“However, if ruts exist, do the least amount of light tillage necessary to smooth the field enough for the planter or drill to operate,” Reeder says. “This is no time to try deep tillage. Look for signs of compaction during the summer, and then consider subsoiling or planting a cover crop to correct it after harvest.”

That’s probably good advice for farmers who like to chisel plow in the fall.

“It’s a big risk to till wet ground in March,” Reeder adds. “There’s less chance of freezing and thawing to break up clods before planting.”

Farmers can take steps to better manage compaction in the future by following these tips:

  • Practice continuous no-till. OSU research has shown that continuous no-till resists compaction better than soil that was deep tilled, or subsoiled.
  • Plant cover crops to keep plants on the land year-round. Doing so mimics Mother Nature because soil structure, organic matter and other “living” components are in a steady state, says OSU Extension Educator Jim Hoorman.
  • Practice controlled traffic – a method whereby all farm equipment is driven in the same paths year after year.
  • If you’re not using controlled traffic, run tires at the correct pressure to reduce compaction. “Many farm tires are overinflated, which reduces the tire footprint, increasing compaction,” says Reeder. “Many farmers can easily reduce tire pressure and it won’t cost them anything.” Over inflation also reduces traction.
  • Remove excess weights that make a tractor heavier than necessary. Extra ballast needed for a tillage operation could be removed when pulling a planter.
  • Add more tires, or switch to bigger tires or rubber tracks. The more rubber that comes into contact with the ground, the less pressure on the soil.
  • Consider improving surface and subsurface drainage. A good drainage system helps the soil dry out faster, reducing the potential for soil compaction. "These practices could lead to better soil structure and minimize yield losses in future years," Reeder said.
Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.