is part of the Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

  • American Agriculturist
  • Beef Producer
  • Corn and Soybean Digest
  • Dakota Farmer
  • Delta Farm Press
  • Farm Futures
  • Farm Industry news
  • Indiana Prairie Farmer
  • Kansas Farmer
  • Michigan Farmer
  • Missouri Ruralist
  • Nebraska Farmer
  • Ohio Farmer
  • Prairie Farmer
  • Southeast Farm Press
  • Southwest Farm Press
  • The Farmer
  • Wallaces Farmer
  • Western Farm Press
  • Western Farmer Stockman
  • Wisconsin Agriculturist

Disks Stage a Comeback

In the midst of a cyclical downturn in tillage sales, there's one tool that is gaining ground: disks.

Growers are adding disks, or disk harrows, to their toolbox to tackle tougher corn residue, a growing problem on Midwest farms.

“One of the trend lines we are seeing is residue management,” says Larry Kuster, marketing specialist for AGCO Sunflower. “And we can debate about strip-till, no-till and other farming practices, but we are all working with genetically altered crops now.”

Kuster says that while genetically altered crops produce higher yields they also leave more residue. The average amount of residue on a 200+ bu. cornfield today is 5 tons/acre compared to just 2 to 3 tons/acre less than a decade ago.

The plant cell walls contain lignin, a chemical compound that holds the plant cells together. The lignin in genetically modified hybrids doesn't break down over winter as easily as the lignin in conventional hybrids. “We started seeing the problem eight years ago with Roundup Ready beans and Bt corn,” Kuster says. “Farmers were complaining that residue wasn't passing through their harrows, and they wanted us to adjust the implements. We quickly found we were dealing with a different plant.”

In addition, farmers are growing more continuous corn acres as opposed to using the old corn and bean rotation. The end result is a growing stockpile of stalks and stems that can interfere with planting and form a hotbed for disease.

Break it down

To deal with the different and tougher plant, growers have started using disks again. “In the past there hasn't been as much need to size the residue,” says Kail Schoen, marketing manager with Landoll Corporation. “Farmers used to do more standard ripping or chiseling in the fall and then hit the field with the cultivator in spring.”

Unlike other tillage tools, disks are specifically designed to cut residue down to manageable chunks and mix it into the top 4 to 5 in. of soil. Wide rows of circular blades do the cutting and mixing. The top few inches of soil form the zone where soil microbes are the most active to allow for decay.

“We like to reference a wooden fence post,” explains Jamie Meier, Landoll's ag division sales manager. “Where does a fence post rot? Always right below the soil surface because there is air, soil and moisture, which make the microbes most aggressive.”

For the residue to decompose, it must be incorporated in the ground before the soil temperature drops to 40° when microbes go dormant. Disks are sized wide, covering 30 to 40 ft. in a pass, allowing you to meet that window. “Compared to a smaller ripper-type tool, you can get in the field and cover a lot of acres quickly, which is especially important further north in the Corn Belt,” Meier says.

Manufacturers recommend you disk as soon as possible after harvest before the soil temperature drops. Once the residue starts breaking down, the soil gets a kickback in nitrogen. The available nutrients on an acre of 200-bu. corn translate to 77 lbs. of nitrogen, 12 lbs. of phosphorus and 116 lbs. of potassium if the residue is sized and incorporated in the soil. The additional nitrogen can help offset the cost of fuel required to make a disk pass.

Disk usage is bridging all tillage classes — from conventional till to no-till. “The disk harrow is one of those tools that no matter what your tillage beliefs are you are probably still going to have a good disk harrow,” says Tom Evans, vice-president of sales for Great Plains Manufacturing, a company specializing in conventional and vertical tillage tools. “Even if you are a firm believer in vertical tillage, you can still disk afterward or use a disk prior to subsoiling without changing the soil density.”

Evans says disking is one of the fastest and most efficient ways to chop residue and smooth out combine ruts.

Landoll's Meier says conventional tillers are doing a disk pass prior to running the traditional coulters, chisels or disk rippers. No-till farmers, on the other hand, are using the disk as their only tillage pass.

Cuts across classes

“To give you an example, we just talked to some no-till guys who are looking at buying a disk to get rid of residue,” Meier says. “They plan to disk in the fall and plant on a stale seedbed. They still consider themselves to be practicing no-till because they are not making a secondary pass in the spring.”

He says disks can help no-tillers with other challenges, too, like slow soil warm-up and uneven emergence, by leveling the ground and incorporating the residue so the planter can penetrate the ground more evenly.

Downsides of disking

On the downside, disking may not work equally as well in all soil types. It also leaves less residue cover than no-tilling, which makes the soil more susceptible to erosion. However, tillage manufacturers say that, in this new cropping environment, no-till farmers, including those who are switching to strip-till, will need to do something to handle residue, especially if they are looking at using a corn-on-corn rotation.

Disking also does not address soil compaction, which occurs deeper in the soil profile. Growers concerned about compaction will have to make a separate pass with ripper-type shanks to fracture compacted layers.

David Benson, spokesperson for Krause Corporation, says that, because compaction is an issue of many farms, disk ripper combination tools also have been a hot item this year for his company.

“When talking with customers about their fall tillage needs in cornstalks, I advise there are basically two scenarios depending on your soil management needs,” Benson says. “One is if you have deeper compaction you'll need to size and incorporate residue and address the compaction with some type of deep tillage. Then I recommend a one-pass combination primary tillage system like the Krause Dominator. If sizing and incorporating residue is the main goal, then a tandem disk harrow is the higher speed, higher productivity way to go.”



Sunflower's disk harrows feature an increased disc angle of 20° for a more aggressive cut. The manufacturer also has increased the weight of the frame to provide a heavier weight per foot of cut. Included in the series are the 1434 tandem disk, which is 21 to 36 ft., and the 1544 disk harrow in working widths of 42 and 45 ft. designed for large-acreage disking. The disks are available with 22- or 24-in. disc blades with 8¾-in. spacing for enhanced residue coverage and better soil penetration.

Suggested list price: $31,000 to $79,000. Contact AGCO Sunflower, Dept. FIN, 4205 River Green Pkwy., Duluth, GA 30096, visit or, or circle 214.


Deere has increased the concavity of all its disc blades to make them aggressive on stalks. “We have recognized these stalks are getting harder to manage,” says Yancy Wright, crop system specialist with John Deere. “So on most of our disks we are putting out a higher concavity blade that has more of a cup to make it more aggressive.”

All new John Deere disks will feature a 20° gang angle in front and 18° angle in back. Customers who already have a disk can buy replacement discs with the higher concavity.

Disks range in price from $12,022 for a 11.5-ft.-wide rigid disk to $50,846 for a 35-ft. 4-in.-wide folding disk. Contact your John Deere dealer for sizes and prices, visit or, or circle 215.


Krause introduced its new 8000 series tandem disks this fall, which includes two new models: the 8200, an all-purpose tandem with an average of 195 lbs./blade, and the 8300 primary tillage tandem with an average of 223 lbs./blade for extreme residue conditions.

Krause's Quad-Fold system on its 36- to 38-ft. models creates a transport height of 13 ft. 5 in. A new Hi-Clearance scraper system designed for Bt corn is standard equipment.

Suggested list price for a 34-ft. 8200 model is $47,723. Contact Krause Corp., Dept. FIN, Box 2707, Hutchinson, KS 67504, 800/957-2873, ext. 0, visit or, or circle 216.


This company introduced two disk harrow lines this year to match farmers' available tractor horsepower. The 3000 narrow center frame and 4000 wide center frame include six models that range in cutting width from 23 to 36 ft. in 3-ft. increments. Both series will run about 180 to 200 lbs./blade, which is about 15 lbs. heavier than many other disks on the market, the company claims. Disc angle is 20° on the front gangs and 18° on the rear. “Your front gangs are working in untouched ground. So they need to be a little more aggressive to do a level job,” Evans says.

Suggested list price: $30,000 to $45,000 on 36-ft. size. Contact Great Plains, Dept. FIN, Box 5060, Salina, KS 67402, 800/255-0132, visit or, or circle 217.


Landoll says its new 6230 tandem disk is heavier than most on the market to cut through heavy Bt stalk, putting down about 210 lbs./blade. Disc blade spacing is 8¾ in., which Meir says does a nice job of sizing and leveling. “Some competitors use wider disc spacing for increased weight per blade but sacrifice leveling capabilities and allow more rootball crowns to go through untouched,” he says. Other features include a maintenance-free lift system and pivoting gauge wheels to help control the wings of the disk from gouging.

Suggested list price: $30,000 to $45,000 for 21- to 36-ft. disk. Contact Landoll Corp., Dept. FIN, 1900 N. St., Marysville, KS 66508, 800/428.5655, visit or, or circle 218.


Wil-Rich introduced the 7650 disk harrow this year with improved hydraulics and an optional front-to-rear leveling feature. The series features 24- or 26-in. blades with a weight of approximately 490 to 540 lbs./ft. with 9-in. spacing. Disc angles are set at 20° on the front gang and 18° on the rear. The 7650 series is available in sizes of 18 through 34 ft. in 3-ft. increments. Prices range from $23,500 to $43,000. Circle 219.

Wil-Rich also recently purchased a disk brand known as the Wishek. “These disk harrows are unsurpassed in cutting and mixing soil in either wet or dry conditions,” says Gordy Nyquist, sales manager. Prices for the Wishek are not yet available. Circle 220.

Contact Wil-Rich, Box 1030, Wahpeton, ND 58075, 800/688-3300, or visit or


Case IH claims its new RMX370 all-purpose tandem disk, with its 24-in.-dia. blades on 9-in. spacing, has the highest weight per blade in its class. It features a true-tandem design with indexed blades for stability of operation and straighter pulling in the field. “The RMX370 has shallow-concavity blades on the front for greater penetration in tough residue and soil conditions, and at higher operating speeds,” says Tim Nix, marketing manager of soil management products. “In addition, when equipped with a rear coil tine or spike harrow, it can handle lots of tough residue and still leave an excellent seedbed.”

Suggested list price: $25,000 to just more than $50,000, depending on sizes and options. Contact your Case IH dealer, visit or, or circle 221.

Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.