Farm Progress is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Serving: IA

Beware of moldy corn this spring

pile of corn grain
COOL IT TO KEEP IT: Last fall’s humid weather will cause more stored corn to develop mold problems, as weather warms in late winter and into spring. Farmers are urged to check bins often and use aeration now to cool the grain.
Iowa grain quality specialist warns processors and farmers about moldy corn and encourages aeration.

Ethanol plants need to be especially cautious of moldy corn this spring due to a humid fall and excessive amounts of corn stored in outdoor piles. Charles Hurburgh, Iowa State University Extension grain quality specialist, says mid- to late February will bring reports of moldy corn, hot spots and blue eye mold — a fungus turning the germ a bluish color, especially if temperatures do not decrease.

“Ethanol plants are going to have to be careful,” says Hurburgh, who serves as director of the Iowa Grain Quality Initiative. “Contrary to popular belief, moldy corn is the worst thing that can be put in an ethanol plant. The fungi that grow on the corn kernels produce lactic acids. These acids react with the enzymes, the yeast is not happy, and the fix is to add antibiotics to the fermenter.”

Distillers grains a concern
Ethanol coproducts, known as distillers dried grain with solubles (DDGS), are typically used in livestock feed. The presence of antibiotic residues in ethanol coproducts has been difficult to detect, but the issue is important as society becomes more interested in the production of food.

“Ethanol plants don’t like antibiotics or having to alter the fermentation process,” says Hurburgh. “At the same time, processors don’t want to dump a fermenter after only getting 2 gallons of ethanol per bushel, when they’re used to yielding almost 3. The best fix for those kinds of problems is better-quality corn. Then ethanol producers are not in that situation in the first place.”

September and October brought only three days of dew points below 45 degrees F. As a result, grain supplies did not reach suitable temperature levels before being placed into storage, which can negatively impact grain quality. “The issue going forward will be to get all corn properly cooled and aerated before spoilage worsens,” says Hurburgh.

Cool stored grain with aeration
The Iowa Grain Quality Initiative has developed a set of online learning modules to help producers learn proper grain storage practices. The Iowa Grain Quality Aeration Module, CROP 3083B, produced in cooperation with the Iowa Grain Quality Initiative and Crop Adviser Institute explains how moisture, temperature and time interact to cause grain spoilage. Hurburgh encourages farmers and other grain handlers to learn to establish a grain quality monitoring system with frequent temperature checks of stored grain to prevent spoilage.

Other available modules address grain storage economics, food safety and animal nutrition, supply chain analysis and processing. These modules are free and can be accessed from the Extension Store website.

Source: ISU Extension


TAGS: Corn
Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.