is part of the Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

  • American Agriculturist
  • Beef Producer
  • Corn and Soybean Digest
  • Dakota Farmer
  • Delta Farm Press
  • Farm Futures
  • Farm Industry news
  • Indiana Prairie Farmer
  • Kansas Farmer
  • Michigan Farmer
  • Missouri Ruralist
  • Nebraska Farmer
  • Ohio Farmer
  • Prairie Farmer
  • Southeast Farm Press
  • Southwest Farm Press
  • The Farmer
  • Wallaces Farmer
  • Western Farm Press
  • Western Farmer Stockman
  • Wisconsin Agriculturist

Team FIN favorites

It wasn't easy to pick just a few items from the hundreds displayed at this year's National Farm Machinery Show. So we turned several Team FIN farmers loose on the task. Here's what grabbed their attention on the show floor.


The new 3220 Fastrac has a turbocharged, 220-gross-hp, 5.9-l Cummins engine that's comfortable working in the field or flying down the road at speeds of up to 40 mph.

The Tier II compliant engine has an air-to-air charge cooler, offering strong torque at low revolutions. An electronically controlled Bosch radial piston pump provides clean running and fast power delivery. The variable horsepower system has two separate power curves to ensure optimum performance at both highway and field speeds.

Standard Field Speed Control (FSC) allows the driver to set engine rpm to a desired level, increasing or decreasing the setting via a rocker switch. The operator then can activate or deactivate the field speed with the flick of a second switch when entering or leaving a working environment. The FSC is especially useful when using the PTO. The Fastrac design allows implements to be mounted on the front, rear, or rear deck.

List price is $135,000. Contact JCB Agriculture, Dept. FIN, 2000 Bamford Blvd., Pooler, GA 31322, 888/742-5522, visit or


Manufactured in China, Eagle KM series tractors come with Deutz-built 80- or 100-hp engines. The company bills the Eagles as economical tractors with a surprising number of features. Both models come standard with a shock-absorbing suspended cab. KM series 80-hp models are available as 2-wd or 4-wd. A permanently engaged synchro-spiral gearbox ensures easy shifting in 27 forward and nine reverse speeds. There's also a two-speed PTO.

Prices start at $23,990 and $29,990. Contact Eagle Tractor, Dept. FIN, 511 Wallace Wilkinson Blvd., Liberty KY 42539, 606/787-7513, visit or


Better than a drop seeder, the Versa-Drill incorporates seed into the ground for less waste and better germination. The unit is designed to pull behind an ATV or small tractor for seeding waterways and wildlife food plots. All ground-engaging components are rolling, with no shanks to drag trash. The seed-metering system accommodates a wide variety of seed sizes. Several models are available with choices of a 12v hydraulic lift, manual winch or 3-pt.-hitch lift system. Weight is approximately 750 lbs.

Prices range from $4,595 to $5,000. Contact Kasco Mfg. Co. Inc., Dept. FIN, 170 W. 600 N., Shelbyville, IN 46176, 800/458-9129, visit or


Wire-feed welders are gaining in popularity with farmers, and this 80-amp gasless wire feed with spool gun got lots of looks at Louisville. The Century 83076 welds 18-gauge sheet metal or up to 3/16-in. steel. The spool gun is designed for extended reach (12 to 18 ft.) and better welding performance. This model plugs into a standard 120v, 15-amp outlet and uses .030-in. flux-cored steel welding wire for welding without shielding gas. You can select four different voltage settings.

The complete unit includes spool gun, welding nozzle and contact tip, welding shield, starter spool of wire, ground clamp and instruction book.

Price: $300. Contact Facemire Welding Supplies, Dept. FIN, 6016 S. 700 E., Franklin, IN 46131, 812/526-6937, visit or


Fix hydraulic hose end fittings in the field. The 1434 hose assembly system provides a complete set of tools to let you make end replacements without removing the entire hose assembly. The 3-lb. kit repairs ¼- to ¾-in. hoses. Tools include a crimper, hacksaw, 4-in. caliper, hose end holder, ½-in. wrench, Teflon tape, 3-in. clamp and carrying case. The kit shown is this photo has a special military-issue case. Kits for farmers have the same tools in a slightly different case.

Price is $189 plus shipping. Contact Clever Tech Inc., Dept. FIN, 4121 S. Canfield Rd., Jesup, IA 50648, 319/827-1311, visit

Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.