Farm Progress is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Serving: IA
Keep Air Running On 2011 Grain This Fall

Keep Air Running On 2011 Grain This Fall

Grain quality this year should be good, but not exceptional. Stresses will cause variability. Grain will be warm coming out of the field; both corn and beans will need to be cooled immediately after harvest.

Keep the air running on stored grain this fall. That's the advice of Charlie Hurburgh, Iowa State University ag engineer and grain quality expert. For corn, it looks like the next 2 to 3 weeks will be a good time to let your crop dry down in the field. But only if your stalks can keep standing until the combine comes through the field. With this year's erratic growing season weather, wind and hail damage, corn leaf disease problems and temperatures taking an early dip below the freezing mark last week, there is good reason to check your corn stalks.

"Check for signs of stalkrot and prioritize your fields for harvest," Hurburgh advises. "It will be hard for the corn in many of the fields that were stressed this year to keep standing until you run the combine through."

What does this mean for your grain storage management this fall?

The year 2011 is far from an average year. "Last year we had very dry grain, thanks to warm dry weather after a summer of warm nights and accelerated plant development. In 2011, the weather just could not make up its mind," he notes. "In the 2011 growing season it was wet, and then moderate, then hot but humid in the summer, then moderate and dry, and then rain and storms. The net result is that average exists as a mathematical term but probably not on anyone's farm."

* Corn harvesting and drying considerations for this fall's crop. Until July, conditions looked great with high yields of heavy corn in the offing. However, the extreme heat in July accelerated plant growth. For example, there were fields with denting very early, fewer kernels per ear, lighter kernels and eventually tipping back. From a grain quality perspective, the potential for high test weights (57 to 60 lbs. per bu.) was reduced. The subsequent shift in August to cooler nighttime temperatures limited the chances for field mold and toxin development. The forecast for the next 10 days is very conducive to field drydown and low grain moisture at harvest.

At current corn prices, artificial drying is preferable to grain loss in field

There are some considerations to think about when deciding to let the corn dry down in the field for the next 15 to 21 days. If you determine that particular fields have stalk rot, which is prevalent this year, harvest those fields early and dry the corn. At current corn prices, harvesting the crop and drying it in a grain dryer is preferable to grain loss from letting the crop stand in the field.

At $2 per gallon for propane, the drying cost in an average dryer (2,000 btu per pound of water) for one point of moisture is equal to about 0.25% field loss, with $7 corn. Dryers vary and propane costs change but in general, very little field loss can be accepted before early harvest and drying is a better choice.

Corn diseases have been prevalent this year, especially Goss's Wilt, normally a western Corn Belt problem. This bacterial disease has caused premature death of corn plants in many fields. We do not know the total impact of Goss's Wilt on grain quality, but premature death normally reduces kernel weight and test weight. "We are doing a study this fall of fields with Goss's Wilt to determine if this disease affects quality beyond low kernel weights and test weights," he says.

Use test weight as factor in making your corn storage decisions

Use test weight as a storage decision criterion. In general, corn below 52 lbs. per bushel (dry) will be a high storage risk; market it first. There will be variations by hybrid and area; know the test weight of each one to make good decisions.

The test weight readings from elevator moisture meters are adequate to make these decisions assuming the elevator has periodically checked against a USDA grader to adjust the machine. There will be large variations in test weight of corn this year. Feed value (protein) is likely to be good. Lower yields and fewer nitrogen-removing heavy rains favor increased corn protein, which is good for livestock feed, but which reduces ethanol yield per bushel.

There is a transgenic (GMO) issue this year. You may have heard of the Agrisure Viptera 3110 and Agrisure Viptera 3111 problem. Viptera is an insect prevention biotech trait developed by Syngenta to address insect resistance and other issues especially in continuous corn. This is the first year of commercial planting.

Recommendations on handling corn containing Viptera biotech trait

There are approximately 70 hybrids from Syngenta companies and licensees with this trait. Estimates are about 2% of U.S. corn acres concentrated in the Central Corn Belt have this trait. This transgenic event is approved in all major world markets except China. The Chinese approval process is well structured and organized but requires at least one export nation to approve it before their two-year field tests begin. The Chinese process will conclude in March or April 2012; until then, corn or corn products (e.g. dried distillers grains with solubles for ethanol) containing this transgenic event cannot be imported.

If you planted corn hybrids with this trait, you should hold the corn for marketing in 2012 rather than at harvest, unless you know the buyer does not sell corn or corn products into market chains that could include China. Also notify the buyer if there is a chance your deliveries could contain this trait. In the next week or so, we will release a more in-depth discussion of the Viptera 3110 and 3111 issue and response options for producers and grain buyers.

Keep the air on your stored grain (both corn and soybeans) this fall

It appears that both corn and soybeans will be harvested in hot weather this year. The most important initial action in grain storage is to cool the grain. You may have to add one to two more aeration cycles this year. Dry air (low dew points) will cool grain by evaporative cooling. The high value of grain puts a premium on cooling but not over drying. After harvest, ISU will write a series of newsletter articles on inventory management for quality control and weight preservation.

* Soybean storage this fall could be a little more complicated. Rains that we had in late summer could complicate your soybean storage decisions this fall. Many soybean fields benefited from late-season rains. But the result will be mixed maturity in the same field as you have both dry and wet beans together.

This will be a challenge for combine setting, but from a storage perspective, such mixtures will respond in storage like the wetter fraction. Therefore, the common practice of putting beans in unaerated bins will not work well; you should aerate the beans to cool and equalize moisture, then transfer to other bins if needed.

Moisture meters will read 1 to 2 percentage points low on mixed moisture soybeans, especially in the first week of harvest. This is a storage issue, and also an inventory management issue. One percent moisture in $14 beans is about 16 cents per bushel. There is a much greater premium for accuracy in all grain testing and inventory monitoring.

What to do with beans that were still green when frost hit last week

Frost hit parts of northern Iowa early in the morning on September 15. Corn is likely out of risk, but some soybean fields were still green when nipped by the frost. Green soybeans contain chlorophyll which enters the oil requiring additional refining. Green soybeans also do not extract as efficiently, causing a loss of oil into the soybean meal.

The greenness of the beans will subside somewhat over time. The best plan is to put these beans in an aerated storage and wait two to four weeks before delivering them. If there are green soybeans, buyers will need to refresh themselves on the "line" (intensity) of greenness required to be classed as "Damage in the Grades." Always use an official federally-licensed grain inspection agency to determine this line, and as a referee in borderline cases.

Protein will probably be average to above average in soybeans this year, as the late season growth favors protein content of the beans.

Summing up the situation this fall: Grain quality this year should be good, but not exceptional, says Hurburgh. Stresses that hit the crop during the 2011 growing season will cause variability in yield and quality of grain; use the test weight of corn as a criterion for making your storage decisions. Grain will be warm coming out of the field, and both corn and beans will need to be cooled immediately after harvest. Mixed moisture soybeans will create storage issues that can be avoided by good aeration immediately after harvest.

Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.