Farm Progress is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Serving: West
Early Alfalfa Harvest Coming

Early Alfalfa Harvest Coming

Plant height - calendar date - is the best tipoff on when to begin putting hay. NDSU research says to start cutting when alfalfa is 28-inches tall.

Throw out the calendar. It's time to harvest alfalfa.

The Dakotas are in for one of their earlier alfalfa harvests ever, says J.W. Schroeder, NDSU Extension dairy specialist.

Plant height - not the calendar date - is the best indicator of when to take the first harvest because relative feed value and relative forage quality decrease as the plant height increases, he says.

The RFV decreases with increasing plant height at all maturity stages. For example, the RFV decreases 71 units at the late vegetative stage, 61 units at late bud stage and 53 units at the late flower stage when alfalfa increases from 20 to 40 inches in height. Therefore, the taller the plant, the earlier in plant maturity that harvest should occur to get prime hay (RFV greater than 151) in the bale.

According to NDSU research, harvest should begin whenever the alfalfa reaches about 28 inches in height, regardless of the maturity stage.

"If prime hay for feed or sale is the objective, then that means you need to get ready for an early start on the harvest in 2010," Schroeder says. "But keep your target in mind, and be sure to allow another 25 to 30 units of RFV for harvesting losses. In other words, harvest will have to begin at 175 to 180 RFV to meet your target."

The best method to estimate the RFV or RFQ in the first harvest is to use a PEAQ (Predictive Equations for Alfalfa Quality) stick available for purchase from the Midwest Forage Association (go to www.midwestforage.org/peaq.pdf), he says. It basically is a method to predict the forage quality of standing alfalfa using a calibrated stick.

Soil type and topography commonly affect height and maturity. Thus, alfalfa on hilltops has less growth and is more advanced in maturity than plants in lower, wetter areas of the field. Schroeder recommends basing harvesting decisions on the growth in the valleys because the short growth and more advanced maturity on the hilltops will not affect the quality extensively.

"Assuming that Mother Nature will provide ample moisture for subsequent forage harvests, keep in mind that second and third harvests are generally shorter in height than the first," he says. "Therefore, the optimum maturity stage at harvest for these will be more advanced than the first harvest."

The first harvest is always the most variable in maturity and, therefore, the least predictable, he notes. NDSU forage research found that under a four-cut system, the maturity at harvest generally is mid to late bud stage and occasionally 80 percent bloom stage (under drought stress) in the second harvest and 10 to 20 percent bloom stage in the third harvest or later under drought stress.

Once producers decide when to harvest, they also need to consider the time of day for the harvest. Research has shown that harvesting in late afternoon or early evening produces a forage with a higher total nonstructural carbohydrate content than one harvested in the morning due to the current day's photosynthesis. Higher carbohydrate levels in the plant will increase digestibility, resulting in improved animal performance.

While plant height and scissor cutting reports from your area, if available, are the best indicators of when to start harvesting, do not leave plant maturity out of the harvesting decision, Schroeder says.

If the alfalfa is for lactating dairy cows, it should be harvested at about 160 RFV, or when it has about a 37 to 38 percent neutral detergent fiber. The crude protein content in alfalfa of this quality will be about 20 percent. For wet forages, the haylage dry matter of 40 to 45 percent is ideal.

Don't overlook particle length of the haylage, Schroeder says. Cattle still need some length of chop to stimulate chewing. Determine your effective fiber by using the Penn State forage particle box to measure the chop length of the alfalfa a couple of times each harvest day. Forage particle boxes are available from Nasco at www.enasco.com.

The objective is to have 15 to 20 percent of the chopped alfalfa by weight still remaining on the top screen. Haylage can become gummy and sticky, so make sure you shake wet samples well and look carefully at the material on the top screen to see that it contains stems and not a mat of wet haylage.

Harvest still should occur at 26 to 28 inches in height, Schroeder says.

"If we continue with warm and dry weather this spring, alfalfa plants will mature early and, therefore, the alfalfa plant will become more advanced than anticipated," he adds. "The amount of fiber and lignin in the alfalfa plant that affects forage quality is related more to plant height than plant maturity. Since all indications are this spring will stay warm, plant maturity/height will sneak up on us faster than expected. For example, alfalfa plants on Fargo research plots already were 12 to 14 inches in height on May 3. Don't be surprised if you see alfalfa in the swath by Memorial Day."

Schroeder also offers these notes of caution: The relationship between height and quality was developed in pure alfalfa stands, so quality estimates in alfalfa-grass fields based on just alfalfa will be less reliable. Furthermore, frost still is possible. The good news is that a light frost (29 degrees F) is not a concern. However, if temperatures get below 23 degrees F, then losses would be likely.

"So before you put off the alfalfa harvest because you think it is too early, or you still need to service the chopper, check those fields for height and maturity," he says.

Source: NDSU Extension Communications

TAGS: USDA
Hide comments
account-default-image

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish