Farm Progress is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Serving: WI

4 questions to ask agronomist before sampling soil

TAGS: Planting
Vince Streano/Getty Images Hand taking a soil sample
SOIL SAMPLING: The best window to pull a soil sample is following harvest or after fields are fit for planting ― up to three to four weeks after emergence.
Planning with your agronomist now can reap the rewards of accurate soil data.

Spring soil sampling is right around the corner and the soil samples that will be pulled in 2021 will be providing useful data through the 2025 growing season. 

“Soil sampling is a major investment and carries tremendous value,” says Scott Fleming, nutrient management specialist and sampling director for Rock River Laboratory. “These samples will also drive most of the fertility management decisions on the farm.”

Fleming explains that planning should be a key part of the process, long before a probe enters the ground. To help ensure representative samples are collected come spring, Fleming recommends a few key questions to discuss with your agronomist:

1. What is the timeline? Soil is always there. This means it can always be sampled. “While the first statement is true, the second may require an asterisk,” Fleming says. “The soil is always there but pulling a high-quality soil sample isn’t always possible.”

Many factors come into play that prohibit pulling a quality soil sample. Frozen ground and snow can make collection impossible. Tillage can make getting through a field difficult and the fresh-tilled soil can make depth consistency a major problem. Thawing soil and excessive soil moisture can also make field access difficult.

Fleming says the best window to pull a soil sample is following harvest or after fields are fit for planting ― up to three to four weeks after emergence.

2. Is the timeline important? The sampling timeline can be a tricky subject. On one hand, there is a drive to pull samples in the fall and get results and recommendations back in time to apply fall fertilizer and perform fall tillage. On the other hand, fall can get short and wet, and keeping the plows moving is the goal. For this reason, many growers choose spring sampling. After all, the soil is always there.

“The old adage was to never switch up the seasons when it comes to soil sampling,” says Fleming. If you normally sampled in fall, keep sampling in fall. If you sampled in spring, stay in spring. Why introduce another variable into interpreting the results? This strategy seemed ideal before mega data sets and far more samples in those data sets.

“At Rock River Laboratory we have conducted in-house comparisons of spring vs. fall and found slight differences, but never enough to change a recommendation,” Fleming says. “The two analytes that we’re most likely to see a change due to season are potassium and pH.”

He says in the study, the average change in potassium was about 3 ppm higher and pH was about 0.1 higher in the spring. The University of Wisconsin-Madison’s data review found a similar trend. “While Dr. Carrie Laboski found this seasonal increase of soil test value to be slightly higher, the change was still not enough to warrant a major management change,” Fleming says.

3. Who will be pulling the samples? With the role the sampling results will play for years to come, a qualified individual is an important cog in the sample collection process. Fleming also suggests if the grower has time to pull the samples themselves, it can serve as a valuable learning opportunity.

“The grower knows what areas do well and what areas are frequent underperformers,” Fleming says. “The grower will also get a chance to see compaction and traffic management problems, sheet and rill erosion that would be missed from the cab, and disease and insect pressure that may have been missed at harvest.”

But growers don’t always have the time or equipment to do their own sampling. If hiring someone to do the work, Fleming recommends checking their background and experience. “After all, results are only as good as the sample submitted to the laboratory,” he says.

4. Where are my samples going? When high-quality soil samples are pulled, they need to be submitted to a qualified laboratory.“Be sure to ask where your samples are going,” Fleming says. “If you don’t ask, your samples may be submitted to a laboratory that is not approved in your state.”

Different states have different requirements when it comes to soil testing. In Wisconsin, for example, a laboratory must be certified by the state and participate in the Wisconsin laboratory proficiency program. In other Midwestern states the requirements are different.

“The state may require participation in one of the nationwide proficiency programs such as Agricultural Laboratory Proficiency or North American Proficiency Testing,” Fleming says. “At its core, a laboratory proficiency program requires labs to use specific prep and analysis procedures. It also requires the laboratory to analyze known and unknown check samples and submit them to the proficiency organization for validation.”

If you are unsure if your laboratory is certified, Fleming recommends the first place to check is their website. Most laboratories have their certifications and proficiency program participation listed there. “Even if your state does not require soil testing laboratories to participate in a proficiency program, the customer should require it.”

With a bit of planning, the soil sampling process can provide even more value to the grower ― for years to come. The best way to capitalize on this increased value is to make sure the best soil sample possible is being collected. “Review the sampling timeline to ensure it fits into your operational timeline,” Fleming says. “When you decide it’s time to sample, make sure the samples are pulled in a professional manner and sent to an accredited laboratory. After all, if you fail to plan, you are planning to fail.”

Source: Rock River Laboratory, which is responsible for the information provided and is wholly owned by the source. Informa Business Media and its subsidiaries aren’t responsible for any of the content contained in this information asset.
Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.