is part of the Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

  • American Agriculturist
  • Beef Producer
  • Corn and Soybean Digest
  • Dakota Farmer
  • Delta Farm Press
  • Farm Futures
  • Farm Industry news
  • Indiana Prairie Farmer
  • Kansas Farmer
  • Michigan Farmer
  • Missouri Ruralist
  • Nebraska Farmer
  • Ohio Farmer
  • Prairie Farmer
  • Southeast Farm Press
  • Southwest Farm Press
  • The Farmer
  • Wallaces Farmer
  • Western Farm Press
  • Western Farmer Stockman
  • Wisconsin Agriculturist

Boom Benefits | Georeferenced Boom-Section Shutoff Options Can Save You Up To 12%.

Automatic boom-section control can save you up to 12% on over-application, according to recent University of Kentucky research. The study identified up to $2,745 in glyphosate savings across 3,000 acres of production from automatic boom section control technology.

GPS-controlled boom sections automatically turn off to avoid application to previously treated areas. These systems also reduce off-target pesticide application to grassed waterways or other georeferenced landmarks and areas outside field boundaries, with options of up to 48 boom-sections currently available.

Joe David Luck and Scott Shearer, ag engineers at the University of Kentucky, compared data collected from 7-section and 30-section automatic-control systems to a manual 5-section system (see Table 1).

“Lightbars and auto-steer systems may help reduce pass-to-pass boom overlap, but may offer little over-application reduction in point-row areas,” says Luck. “With automatic section control, the best strategy to minimize over-application in point rows is to distribute control sections evenly across the boom to reduce as many large boom sections as possible.”

And, as fields become less regular (square) in shape, over-application tended to increase for all of the sprayers studied. “The automatic control systems maintained lower over-application as field boundaries became more irregular or fields contained more grassed waterways,” he says. “The 30-section automatic system produced the least amount of over-application, followed by the 7-section automatic system, and finally, the manual control system, as field shape complexity increased.”

In comparison to the manual control system, the 7-section and 30-section automatic control systems offered reductions in over-application of 9% and 12%, respectively. All three of the sprayers used an automatic steering system; therefore, these results should be similar for pre- or post-emergence pesticide treatments, essentially doubling these savings if two treatments per year are desired. 

With 7-section automatic boom control, the producer would have saved $1,980 in chemicals across 3,000 acres based on the two-treatment scenario. In the case of the 30-section automatic control system, savings were $2,745 over 3,000 acres. 

A variety of automatic boom-section control systems are available from different manufacturers with between 5 and 48 boom-control sections currently offered. The cost of the automatic boom section control system will typically increase in proportion to the number of control sections.


Details on the study

The University of Kentucky Department of Biosystems and Agricultural Engineering collected data from three self-propelled sprayers, each with different boom-control systems during the 2008-2009 growing seasons. Data spanned a wide variety of field shapes and sizes for all three systems. 

The first sprayer (Apache AS710) used manual boom control with up to five sections and an auto-steer system (SmarTrax, Raven Industries) during 2008. The second sprayer (Apache AS710) used automatic boom control (Envisio Pro, Raven Industries) with seven sections and the SmarTrax system in 2009. The third sprayer (RoGator 1074) used automatic boom control (Zynx X20, Topcon Inc.) with 30 sections and auto-steer (Zynx X20) in 2009.

All three systems were calibrated to deliver an application rate of 10 gal./acre, and the sprayers with manual and 7-section automatic control utilized boom-section valves, whereas the sprayer with 30-section automatic control required individual nozzle valves for boom-section actuation.


January 2011

Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.