Farm Progress is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Serving: United States
planter on field Courtesy of John Deere
SPEED MATTERS: Tests showed a major increase in the number of seed skips at 7.5 mph and greater when using a conventional vacuum seed meter, compared to one designed for higher speeds.

Tech improves seeding consistency

Iowa study compares two high-speed planting systems versus a conventional seed metering system.

Researchers at Iowa State University recently completed a five-year study of high-speed planter equipment in corn and soybeans. They used a 12-row planter equipped with the Precision PlantingSpeedTube high-speed planter system and a 24-row planter equipped with the John Deere ExactEmerge high-speed planter system.

Both planters used individual row hydraulic downforce and were tested using a side-by-side strip trial experimental design. Each planter was used on about 400 acres per year. Also, a third planter with a standard drop tube seed delivery system was included in select fields for seed spacing comparisons. 

Ryan Bergman, program coordinator in ag technology at ISU, provides the following description of the study and the results. He is part of a research team focusing on precision agriculture, big data, telematics, data analytics, aerial imagery and ag machinery automation. 

Crop yield, particularly in corn, may be influenced by seed singulation and spacing. The most significant yield losses occur when “skips” happen at the planter meter, which result in no seed being planted. This creates a total yield loss for that potential plant. Overplanting with doubles or crowding plants through poor singulation will also cause reductions in yield.  

Generally, a standard deviation of 2 inches is acceptable for well-maintained traditional planters and will result in minimal yield impacts in corn. Both of the high-speed planters tested showed consistent and distinctive corn spacing at all speeds. Traditional drop tube planters exhibited a noticeable trend in reduced spacing consistency when speeds increased from 5 to 10 miles per hour. 

Photos courtesy of Precision Planting and John DeereSeed delivery system for Precision Planting SpeedTube (left), and for John Deere ExactEmerge (right)

SYSTEMS TESTED: Seed delivery system for Precision Planting SpeedTube (left), and for John Deere ExactEmerge (right).

The ISU tests showed a major increase in the number of corn seed skips at planting speeds of 7.5 mph and greater when using a conventional vacuum seed meter, compared to a meter designed for high-speed operation.   

Downforce and closing wheels 

High-speed planting will require increased row unit downforce and increased closing wheel force due to the increased planter travel speed. The exact settings for each system will depend on field conditions and spring tillage practices. In general, you can expect 20 to 40 pounds of increased downforce margin and one additional notch in the closing wheel pressure when planting at speeds over 8 mph. 

As expected, increasing planter speed resulted in a direct improvement in planter productivity. In the majority of field conditions, the ISU study found 8 to 9 mph to provide a good balance of increased productivity with excellent seed singulation and placement, and minimal challenges associated with row unit bounce or loss of ground contact. 

Considerations for soybeans 

Improved soybean singulation with high-speed planters did result in improved survival rate of soybeans. On average, the ExactEmerge planter produced soybean survival rates of 84% as compared to survival rates of 77% for the SpeedTube planter.  

Experiments showed that the difference in survival rates correlated with the increase in planted doubles and triples with the SpeedTube design and the increased death rate of these crowded plants. All soybeans in this trial were treated with fungicide prior to planting. Improvements in soybean survival rates offer a direct opportunity to reduce seed input costs and achieve an equivalent at-harvest population. 

High-speed planting of large soybeans did create some challenges with the Precision Planting seed delivery systems. The SpeedTube seed delivery tubes were susceptible to plugging when planting large soybeans (2,750 seeds per pound or less) at rates exceeding 100 seeds per second. This corresponds to a maximum speed of about 7 mph when planting 160,000 seeds per acre in 30-inch rows. No plugging issues were observed in the ExactEmerge planter when planting the same seed size due to the differences in the seed delivery system design. 

Overall, both systems demonstrated excellent corn singulation and spacing at speeds up to 10 mph and confirmed the manufacturers’ advertised performance expectations. High-speed planting can significantly increase daily planting productivity, which will allow more crop to be planted during tight planting windows. 

The soybean survival rate comparison between high-speed planter technologies shows that high-speed planters that provide true singulation of soybeans will have a higher soybean survival rate due to reduced seed doubles and plant crowding. 

The summary of corn spacing uniformity for conventional and high-speed planting systems shows that high-speed planter systems maintain high-quality placement uniformity independent of planting speed and eliminate the risk of yield reductions from seed spacing in corn. 

Source: ISU, which is solely responsible for the information provided and is wholly owned by the source. Informa Business Media and all its subsidiaries are not responsible for any of the content contained in this information asset. 




Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.