Farm Progress is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Serving: Central

High yields are a must with high costs of inputs

CLARKEDALE, Ark. – With cotton costing so much to produce these days, consistently high yields are not a luxury for the Stuckey family of northeast Arkansas – they’re a necessity.

“There are not a lot of ways you can cut costs, other than operate as efficiently as possible and don’t make any more trips through the field than you have to,” said Sam Stuckey, who farms with his brother Fred, and sister Baylus East. “We spend money on cotton like we’re going to have a bumper crop. If we don’t get it, we’re really exposed.”

The Stuckeys put their trust in doing things right and on time. “Hopefully, everything you do raises yield or prevents a loss, or we don’t need to do it,” Stuckey said. “Fortunately, this year, we didn’t blow a budget anywhere on cotton.”

The Stuckeys raise 2,650 acres of cotton, almost 3,000 acres of soybeans, about 900 acres of rice, 500 acres of corn and 600 acres of wheat.

Consultant Chuck Farr handles the scouting duties on the family operation’s Clarkedale farm, which Sam manages, while Danny Moore does the same for the Lepanto farm, which Fred manages.

“It complements our farming operation to have the opinions from two reliable consultants,” Stuckey said.

After harvest, the Stuckeys will cut stalks and may do some light field work where needed. In March, they will burn down cotton fields with glyphosate plus either Clarity or 2,4-D for broadleaf weeds. Occasionally, they will run a Paratill where there is compaction.

A second burndown with Touchdown or Roundup will clean up fields, and get them ready for planting.

Most cotton is planted on stale beds, according to Stuckey. The minimum-till approach is a rare opportunity to cut costs. “Where we have uniform rows – no narrow rows – we’ll plant right on top of the old row without any tillage. We may have to work up rows that have been rutted.”

Fertilizer, a standard 0-30-60 mix with a pound of boron, is applied in late March to early April. After planting and a couple of weeks prior to first bloom, the Stuckeys will make two nitrogen applications, for a total of 110 to 120 pounds, using modified 12-row cultivator rigs.

Seed is treated with Cruiser, and Quadris and Ridomil were applied at planting in-furrow. Varieties at two farm locations (Clarkedale and Lepanto) are PM 1218 BG/RR, ST 4892 BR, ST 4793 R, DP 444 BG/RR, ST 5599 BR, ST 4646 B2R, ST 5242 BR. ST 5599 BR went on a couple of root knot nematode fields, about 280 acres.

Stuckey’s in-season herbicide program begins with an over-the-top application of Touchdown, followed by Sequence, both made before the fifth true leaf.

The Stuckeys built broadcast hoods for applying Sequence when conditions got too windy. “We made the hoods out of black corrugated culvert cut in half,” Stuckey said. “But we prefer not to use the rigs because it’s a slower operation.

“The Sequence gave us some residual to help on palmer pigweeds. Last year on some fields, we missed a timely fifth leaf shot of glyphosate, and the pigweeds grew up.”

On some fields in Lepanto, Fred Stuckey applied Sequence first, followed by Touchdown. “That approach worked out a little bit better,” Sam said. “We had fewer pigweeds where we had the residual down early.”

The Stuckeys will cultivate cotton fields that are furrow irrigated, running a sweep through at least one time to clean out the furrow.

The Stuckeys laid by with Suprend on most acres. “Fields we couldn’t get to happened to be furrow-irrigated acres, so we just cultivated with a broad sweep.”

The Stuckeys are about 75 percent irrigated, and use several methods to get water to the crop – center pivot, down the furrow and flood. “We use rollout pipe to reach some corners of center pivot irrigated fields. Sometimes it’s not necessarily a model of efficiency,” Stuckey said.

No thrips sprays were required this year on most fields. They made up to five applications for plant bugs, using Centric, Bidrin or Orthene. The higher number of applications on cotton was made where corn was an adjacent crop.

Plant bugs were a much bigger problem last year than they were in 2004, but Stuckey isn’t sure why. “Maybe we did a better job of getting everything burned down early. We didn’t have as many weeds on the turnrow, so there weren’t as many places for them to come out of.”

One application was made for bollworm across most acreage, according to Stuckey. Two applications of Mepichlor were made. “We applied 7 to 8 ounces over the row and later we broadcast 16 ounces.”

A cooler August may have provided fewer heat units than the Stuckeys’ crop needed, “but favorable weather in September helped mature the crop.”

On the other hand, the coolness might have cost another plant bug application. “Usually, when we get to 350 heat units after NAWF 5, we quit spending money,” Stuckey said. “Right before the cool spell hit, we were at 350 and clean. A week later, we were only a little above 350 and we had some bugs. We wanted to cover ourselves so we made one more application.”

Getting the leaves off and picking a mature crop will go a long way toward producing a quality crop, according to Stuckey. The Stuckeys defoliate by air with Def, Dropp and ethephon. “We may have to come in and touch up some spots with a ground application.”

Like many cotton producers in the north Delta, the Stuckeys’ 2004 harvest was interrupted by rainy weather, which at the time of this writing was still keeping pickers in the shed. Prior to that, the Stuckeys were a little more than 50 percent harvested. Yields were “exceptional” for the farm coming in around 1,000 pounds on nearly every field.

The Stuckeys were taking the rainy weather in stride. “We thought we’re two weeks ahead, then the next thing we know we’re two weeks behind. But it’s part of farming.”


Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.