Farm Progress is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

An IPM approach to managing foliar diseases in Northeast Texas wheat

Farmers have economical options to treat wheat diseases in Northeast Texas
<p> Farmers have economical options to treat wheat diseases in Northeast Texas.</p>
Foliar plant diseases have been a major obstacle to stabilizing wheat yields in Northeast Texas. Wheat producers are challenged to employ a number of strategies to manage these foliar diseases. Possibilities include genetic, cultural, and chemical approaches.&nbsp;

Foliar plant diseases have been a major obstacle to stabilizing wheat yields in Northeast Texas. Leaf rust, stripe rust and glume blotch can cause devastating losses across the region some years. Plant breeding has been the preferred tactic to manage leaf and stripe rust, but glume blotch resistance is not a primary goal of plant breeders. Genetically-bred leaf and stripe rust resistance is not a permanent fix as new strains of rust develop in 3 to 5 years and often overcome this initial resistance.

Wheat producers are challenged to employ a number of strategies to manage these foliar diseases, including a combination of genetic, cultural, and chemical approaches. Farmers do have production practices to minimize the impact of plant diseases and to stabilize wheat production across the region.

The process begins with Integrated Pest Management (IPM) that combines genetic, cultural, biological, and chemical techniques to produce an economically and environmentally acceptable outcome. Adopting each of the following suggestions will improve the chances of success in managing foliar plant diseases. When all of these tactics are employed together, the odds of producing profitable and stable yields are greatly enhanced.

Genetic Management

The first line of defense to protect against leaf and stripe rust is genetically bred plant resistance. This has been primarily true in the case of leaf rust, but in recent years, efforts have been intensified to incorporate stripe rust resistance into wheat breeding programs with good success.

Stripe rustcan be much more devastating than leaf rust. Local research has shown that yields in stripe rust susceptible varieties can be reduced by 50 percent or more in years with damaging stripe rust infection levels. Both rusts thrive on moist conditions, but stripe rust is a cool weather disease, and occurs earlier in the growing season than leaf rust. Stripe rust thrives in temperatures of 50 degrees Fahrenheit to 60 degrees, whereas leaf rust development is optimized by temperatures of 60 degrees to 70 degrees.

Plant breeding for stripe rust resistance is the best strategy to manage this disease. We do not recommend planting wheat varieties that are susceptible to stripe rust.Foliar fungicides are effective in controlling this pest, but application timing is difficult. Stripe rust spreads rapidly during cool, rainy conditions- periods when field access with ground or aerial application equipment is difficult or impossible. The only way to consistently control this disease with foliar fungicides is to spray at the first sign of stripe rust in the field. Also, since stripe rust can occur so early in the growing season in this region (prior to flag leaf emergence), a single fungicide application often will not persist long enough to protect the plants against later occurring leaf rust and glume blotch infections.

Leaf rustis the most widespread foliar disease in the United States, and the primary emphasis of plant breeding programs is resistance to this disease. Many high yielding varieties with good resistance are available to wheat producers in this region. Foliar fungicides can be used to supplement genetic resistance when leaf rust races mutate, which can change resistant varieties into susceptible ones.

Glume blotchis not a commonly occurring disease in Northeast Texas. It has been observed at damaging levels only four or five times in the past thirty years. However, when it does occur, it can cause yield losses of 10 percent to 20 percent. Glume blotch spores are spread by splashing raindrops, and damaging infections spread during warm and rainy conditions during the grain filling period. The grain fill is impaired, causing shriveled grain and reduced bushel weights. Some varieties appear to be more susceptible to this disease than others, but none of our locally adapted varieties are resistant to this disease. The only effective strategy to control glume blotch in this region is a foliar fungicide applied after heading.

Powdery mildewis a cool weather disease that infects the leaves in the lower canopy during the late fall and early winter months in this region. The best way to manage it is to plant resistant varieties. Foliar fungicides will provide suppression of this disease, but are not as cost effective as planting resistant varieties.

If you are enjoying reading this article, please check out Southwest Farm Press Daily and receive the latest news right to your inbox.


Variety Selection

The best way to minimize the threat of leaf rust and stripe rust is to plant several resistant varieties of soft red winter wheat. Rust races change from year to year, and planting multiple resistant varieties is a time-proven strategy to protect your investment. In the event of a rust race change, it is not likely that all of our locally adapted varieties will become susceptible at the same time. Planting multiple varieties of differing maturities will also hedge your risk from other environmental variables such as a late spring freeze.

Timely Planting

Thirty years of local research has shown the best time to plant wheat for grain in Northeast Texas is October 25 to November 10. Earlier planting exposes the crop to more damage from foliar diseases, and increases the risk to infestations of Hessian fly and aphids. Mid to late November planting will reduce threats from foliar diseases and insects, but it shortens the tillering time and can potentially reduce yields.


Manage wheat for high yields. Sixty to eighty bushel wheat is a realistic goal in Northeast Texas, and the required amount of N, P and K to achieve these levels is warranted. Nitrogen fertilization should be timed to provide the greatest amount of nitrogen to the plants just prior to jointing in the spring. Excessive fall nitrogen is detrimental, unless grazing is the primary objective because it encourages early foliar disease development. Phosphorus is more efficient applied in the row, and we can produce more wheat with less fertilizer by placing the phosphate in the row at planting.

Chemical Control

Foliar fungicides have proven to be an effective tool to manage foliar diseases in this region. They are very effective against leaf rust, stripe rust, and glume blotch. Following is a discussion of our local applied research over almost thirty years.

Foliar fungicides do not enhance yields—they can only protect potential yields from loss to the rusts or glume blotch. Consequently, they are not profitable in the absence of disease.

Our early work was focused on evaluating the performance of foliar fungicides on varieties that were highly susceptible to leaf rust and stripe rust. As would be expected, a fungicide application on susceptible varieties was almost always profitable when disease was present. Our most recent work concentrated on evaluating the performance of foliar fungicides on commercially planted varieties – wheat varieties with at least some level of resistance to the rusts. The results were quite different than our early work with susceptible varieties.

Over the past four years, we conducted a study on the profitability of an inexpensive foliar fungicide (tebuconazole) on four commercially planted varieties with good resistance to both leaf and stripe rust. The varieties included Syngenta Magnolia, Syngenta Coker 9553, Pioneer 25R47, and Terral LA 841.

We selected tebuconazole because it was as effective as any wheat fungicide on the market, at a fraction of the cost of the others.

The tables below compare the yield response of these four locally adapted varieties to a single application of tebuconazole. The numbers represent the bushel per acre change we observed by applying a foliar fungicide. Most of the values we observed by applying a foliar fungicide were not statistically different from the untreated checks (statistical differences are denoted by an asterisk*). The negative numbers do not indicate that we produced less grain by spraying the fungicide, but are just a reflection of random variation in the experiment. But they clearly show there was no advantage to the fungicide application in that instance.

Fungicide Research Summary

Return on investment by spraying tebuconazole for leaf rust in 2009, 2010, and 2011 on these four varieties was marginal at best (Tables 2, 3, and 4). Leaf rust pressure on all of these varieties was very low. The positive returns we observed on Terral LA 841 and Pioneer 25R47 in 2009 were achieved by controlling glume blotch, not leaf rust.

Leaf rust pressure was also very low in 2012. However, we did experience a damaging glume blotch infection across the region, and spraying tebuconazole provided a very good return on investment at the Howe location (Table 5).

Over the period from 2009 through 2011, tebuconazole did not provide a positive return on investment in 13 out of 28 observations, even though the breakeven cost of this application was just a little over a bushel per acre. With a few exceptions, this was a measure of the value of controlling leaf rust in Terral LA 841, Magnolia, Pioneer 25R47, and Coker 9553. Control of glume blotch was the reason we saw a positive return on investment with tebuconazole with these varieties in 2009 in Royse City and 2012 in Howe.

These data demonstrate that a grower cannot afford to spend very much money on a foliar fungicide to spray commercial varieties with some level of rust resistance. If we had used a $16.00 fungicide instead

of tebuconazole from 2009-2011, the breakeven would have been 3.5 bushels per acre, and the fungicide would have only been profitable 5 out of 28 times (Table 6). Rust pressure is usually too low on these varieties to damage them, and a fungicide will not consistently provide a positive return on investment. The decision to use a fungicide on varieties resistant or moderately resistant to leaf rust should be based primarily on the threat of glume blotch.


The formula for success in growing wheat in Northeast Texas is quite simple. Plant several high yielding resistant varieties in a timely manner, manage for optimum yet realistic yields, and use an inexpensive foliar fungicide to protect yourself against a leaf rust race change or late season glume blotch infection.


 J. Swart, Entomologist (IPM), Texas A&M AgriLife Extension; A. Braley, Research Technician, Texas A&M University-Commerce; R. Sutton, Assistant Research Scientist, Texas A&M AgriLife Research; Scott Stewart, Research Technician, Texas A&M University-Commerce, Donald Reid, Agronomy Professor (retired), Texas A&M University-Commerce


You may also like:

AgriLife Research to participate in $3.3 million wheat disease study

Wheat producers boxed into a corner

Wheat genome sequenced

Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.