Farm Progress is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Serving: East

Harvest aids may improve grain sorghum quality

Harvest aids may improve grain sorghum quality
Market moisture specifications improve price prospects for grain sorghum Harvest aides promote uniform moisture levels across field. Proper application timing is critical.  

Our early planted, early maturing, grain sorghum hybrids have accumulated enough growing degree units to reach physiological maturity.  Harvest is beginning here in the Coastal Bend. Grain sorghum growers can obtain higher prices if their sorghum meets market moisture specifications.  To help meet those specifications, growers may apply harvest aids. Following are tips to prepare grain for harvest.

When harvest aids are applied properly, harvest is more efficient and combining is faster, with no reductions in grain weight. Grain from the entire field will have a uniform moisture content, resulting in few “hot” loads and price discounts.  To keep the grain from losing weight, it is critical that growers apply the harvest aids at the proper time, which is once the grain reaches physiological maturity (cumulative growing degree units of 2,673 to 3,360) and the average grain moisture drops below 30 percent. If harvest aids are applied prematurely, both yields and grain quality will be reduced. 

Physiological maturity can be determined by sampling grain with a grain moister tester and also looking at the kernels for a black layer that indicates that the crop is mature.  Pictures of a black layer can be found in a publication L-5435 - “Harvest Aids in Sorghum,” found at the following web address:

Only two products are labeled for use as harvest aids: sodium chlorate (containing a fire retardant) and glyphosate. For satisfactory results, good spray coverage is needed for both products. Eight to 10 gallons per acre (GPA) of solution by ground or 3 to 5 GPA by air is recommended.

Sodium chlorate, which can cause fires if not mixed with a retardant, is a chemically active salt that desiccates the plant. Growers may apply up to 6 pounds per acre. This product is sold under various trade names and concentrations of active ingredient per gallon. For good desiccation, the weather must be hot and dry.

Glyphosate,a common herbicide, will kill the plant. Producers may make a single application of up to 2 quarts per acre.  Since formulations can vary, be sure to check the product label for correct rates per acre.  Once it is applied to sorghum, the plants move the glyphosate to the growing point over 5 to 6 days. Weeds actively growing when the product is applied will also be destroyed.  Use a sprayable grade of ammonium sulfate at a rate of 17 pounds per 100 gallons of water or a prepackaged sulfate formulation to condition the water and improve effectiveness. There is a 7-day waiting interval between application and harvest. The crop is usually ready seven to 10 days after application.

Growers should treat only those acres that can be harvested within 10 days to two weeks after application.  Weather and storms in the Gulf should also be a consideration.  To avoid any premature lodging, inspect the field before the application. Look for stalk degradation from diseases such as charcoal rot, which will cause premature lodging during natural dry down or after harvest aids are applied.  Picture may be found on the web at

Conditions under which charcoal rot is favored include stressful, hot soil temperatures and low soil moisture during the post-flowering period. Host plants are usually in the early-milk to late-dough stage when infection occurs. The fungus is common and widely distributed in nature. To check the plants before treatment, split the stalk lengthwise and look for a hollow stem or black rot just above the root crown. If the stalk is unhealthy, it will generally fall, whether or not it has been treated.

As always when using farm chemicals, read and follow label directions carefully before applying the product.



Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.