Farm Progress is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Serving: United States

Corn Farmers: Here’s the 411 on Nitrogen Inhibitors

Corn Farmers: Here’s the 411 on Nitrogen Inhibitors

Now that we finally have a hint of spring, producers start thinking about planting corn and planning on nitrogen (N) fertilization applications. In case you haven’t noticed, fertilizer prices are a little higher than they were this time last year. This typically leads to questions like: “Should I consider the use of an inhibitor?”

Multiple universities conduct field research with inhibitors to determine effectiveness, but lab studies conducted to determine proof of mode of action are more critical to our understanding of their usefulness. Several inhibitors have sound lab evidence that they do what they are promoted to do (and some do not), but we may struggle to find usefulness from field studies. Thus, university researchers attempt to identify N sources, application methods and application timings that are more likely to benefit from the use of these inhibitors.


Urease Inhibitors

Urea-based N fertilizers are an organic commercial form that requires a biological enzyme to promote degradation to ammonia. Ammonia exists as a gas at normal temperature and pressure, thus it may be lost by volatilization if not exposed to water.  Ammonia loss potential by volatilization for incorporated urea products is negligible because soil holds enough water to capture ammonia as ammonium that can be held on the soil’s cation exchange complex. Surface applications of urea are at risk of loss because there is no opportunity to capture the ammonia as it is produced.

Urease inhibitors can have different modes of action, and the first question we should ask is, “Do they work?” The active ingredient in the inhibitor can act as a substrate for the urease enzyme, thereby protecting free urea by allowing it to stay in solution longer, or the inhibitor can inactivate the enzyme. Agrotain is the most common commercially available urease inhibitor. The active ingredient in Agrotain is N-(n-butyl) thiophosphoric triamide. The mode of action is not clearly defined, but it is thought to act as a substrate for the urease enzyme.  Regardless of the mode of action, laboratory evidence has shown that it does allow urea to be retained in the soil longer.

Other urease inhibitors are marketed, some may have some activity, but it is your job as a producer/consultant to determine whether or not the proposed mode of action makes sense. Be sure to inquire about lab data indicating that the material being marketed does what it is supposed to do. 

Even if a urease inhibitor has been demonstrated in a laboratory to have some inhibition properties on the enzyme urease, the agronomic question still remains as to its usefulness in a field setting. It really depends upon how N is to be applied (and the form) and the rate of N being applied.  Higher rates of urea N (under most conditions) likely do not require urease inhibitors. Surface application of dry urea in high-residue situations is a good place for the use of urease inhibitors. Dribble applications of liquid UAN may benefit from a urease inhibitor in high-residue situations, but clean-till fields are less likely to benefit. Injected liquid UAN (whether it is knifed or coultered) does not require stabilizers based upon current research.


Nitrification Inhibitors

Nitrification inhibitors are the other inhibitors marketed, but they have a completely different mode of action. Any N supplied as a commercial fertilizer is ultimately transformed to a nitrate form of N (or at least a significant fraction of that supplied). In the presence of adequate oxygen, warm temperatures (>50° F) and some moisture, ammonium-N is converted to nitrate-N through a biochemical process (known as nitrification) that requires two forms of soil bacteria. The first bacterium, Nitrosomonas, converts ammonium-N to nitrite-N. The second bacterium, Nitrobacter, converts nitrite-N to nitrate-N. And as you know, nitrate-N is the form we are most concerned about being lost (whether by leaching or denitrification).

Nitrification inhibitors have one primary way of delaying the nitrification process, and that is eliminating the bacteria Nitrosomonas in the area where ammonium is to be present. There are three common nitrification inhibitors commercially available:  2-chloro-6-(trichloromethyl)-pyridine (nitrapyrin), dicyandiamide (DCD), and ammonium thiosulfate (ATS).

Nitrapyrin is the active ingredient found in N-Serve and Instinct. The biochemical activity of nitrapyrin and its ability to suppress growth of Nitrosomonas has been known since the 1970s and it was initially registered in 1974. It is quite effective even at relatively low rates. Dicyandiamide (DCD) is the active ingredient in nitrification inhibitors such as Agrotain Plus, SuperU and Guardian. Dicyandiamide is required at a significantly larger concentration to be effective.

Since each of the products discussed above is highly sensitive to concentration, it is imperative that if they are used they are applied at labeled rates. Cutting rates is not in your best interest as an end user because a lower concentration may not allow the product to perform its job in the soil.

Applying anhydrous with nitrapyrin in the fall (which is not the recommendation for summer crops in Ohio) may realize a benefit of the nitrapyrin (as it is out in the field for a long time), but for most who apply anhydrous ammonia in the spring soon before planting and as a sidedress treatment, the utility of a nitrification inhibitor is difficult to justify since the risk of N loss is low. No-till situations are more likely to show positive yield results than conventional till systems for spring-applied anhydrous. 

Nitrification inhibitors are less likely to show an economic benefit when high N rates are used in the field. Nitrogen losses at high N-application rates are not likely to affect yield as much if lower N rates are applied (fewer bushels per acre are gained with each additional level of N at the high levels).


Application timing, N source, application method, soil texture and tillage are all factors that should be evaluated to determine where urease and nitrification inhibitors should be used. Before buying an inhibitor make sure scientific evidence backs up its claim. A producer and/or consultant should be wary of any product that does not have solid scientific data demonstrating that the inhibitor activity matches the advertised benefit.

Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.