Farm Progress is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

2015 nitrogen management

2015 nitrogen management
If you plan to apply nitrogen this fall, or are thinking about a spring application, here are some considerations from the University of Minnesota Extension, including: soil sampling, management tips, application timing, nitrogen form and inhibitor use. 

Soil sampling

If you plan to use a soil nitrate-nitrogen test, you need to wait until the soil temperature is below 50° F to get a soil test value that is useful for predicting fertilizer need.

Nitrogen management

The past three years have been challenging for nitrogen management for corn. The wet springs have caused larger-than-normal nitrogen losses. In 2014, we saw some of the largest number of acres of nitrogen deficient corn in Minnesota in years. The current University of Minnesota nitrogen guidelines for corn were based on the use of nitrogen best management practices. Fields that had nitrogen applied at UMN guidelines may have been short of nitrogen, if the fertilizer was applied in the fall. One suggestion for fields with a history of fall N applications with N deficiency problems the last three years is to strongly consider pre-plant spring applications or a split application with some side-dress N before the V8 corn development stage.

Application timing

Soon, growers in southeastern Minnesota in soils with high nitrogen loss susceptibility and on sandy soils will be prohibited from fall applications of nitrogen. We know that applying all of the nitrogen in spring and side-dress applications, particularly in wet springs, can cause logistical problems for the dealer and grower, but it will result in better utilization of nitrogen by the crop and potentially less nitrogen loss.

What forms of nitrogen should be used?

For fall and spring pre-plant applications, only use ammonium forms of nitrogen such as anhydrous ammonia and urea. Ammonium-based nitrogen sources reduce the chances of nitrogen loss immediately after application because ammonium is held by the soil. Do not use nitrate forms in the fall or early spring. Nitrate is not held by the soil, so it can be lost via leaching, or if the soil is waterlogged and warm, it can undergo denitrification and be lost as a gas to the atmosphere. Fall applications should not be done until the soil temperatures are 50° F or below, because ammonium will transform quickly to nitrate above that temperature.

Nitrification inhibitors

So what about using a nitrification inhibitor to reduce nitrogen losses? In cases where you know that denitrification is a problem, these products might be useful. Finally, do not use a nitrification inhibitor to apply nitrogen before the soil temperature is below 50° F. It will not reduce the speed of the conversion of ammonia to nitrate enough and you will be wasting money.

Read this from the U of M Extension.

You might also like:

Cover crop goals define mix

Marketing decisions: Sell now or store?

Will cash rent be lower in 2015?

Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.